Aeronautic Engineers

  
Home | Aircraft engineering | other topics | Rotorcraft engineering
  Position：HOME>Aerodynamic engineering>Article Content
2d Fluent and Airfoil
Source：Internet Author：Unknow Pubdate：2008-04-03  
SkyEng (Aeronautics) 25 Feb 04 18:31
Hi everyone,

I need to make some visous calculations on Fluent (Cl, Cd, Cm, Cp) for an  NACA 0012 type airfoil and I would like to know which geometry coul be the most apropriate for your opinion between, C, O and H and moreover which type of structure (unstructured, algebric, hyperbolic or elliptic).

if you have done such type of simulation before and if you have some tips to get better results modifying the settings please let me know...

Thanks


（Click：）

Previous：Wind Loads on Elevated Conical Roof   Next：Airbrake for a Supercar! - actuator controller??
[Add TO Favorites] [TOP] [PRINT] [CLOCE WINDOWS]  
  Hot Article
·fenders vs. no fenders
·vortex lattice method - drag
·What is optimum number of prop
·Human Powered Plane Spar Probl
·Aspect ratio of multi-element
·Supercavitation
·Need Formulas for Calculating
·How do I get into Aerodynamics
·desiging aerodynamic bike part
·GROUND EFFECT
·Need Textbook for Stoke's 2nd
·aeroacoustic for begginers
  Related Articles
·Wind Loads on Elevated Conical
·Airbrake for a Supercar! - act
·Question regarding a particula
·Which one of these FEA can pre
·biplane wing CP
·Maraging wire
·Freeware 2d/3d airfoil calcula
·Aircraft propeller configurati
·Bended foil as an Airfoil
·Aerofoil Lift Curves
·How to use UDF to define a rot
·Youngs Laminar Body
Power by DedeCms